KEB Router 

• Updated Feb 2026

CONNECTING to Local network via the KEB RAD:

• Go to the KEB remote access website via a web browser below. Google is used for this example:

​https://noa.keb-automation.com/#/integrated-tile-view/1

• Verify that the domain and username is as follows and click next:
• 
• Sign in with the Uptime PW. See Uptime rep for PW
• 
• 
  
• Once you are signed in, the list of Site names will appear. Select the Site and RAD device you would like to connect to.
• 

• Next, select the VPN Button option in the right pane and the KEB Server will attempt to Open the device applet.
• 

• Select, Open the device connection applet. This will then start a software that runs in the taskbar and opens a connection to the device.
• 

• A connection window will open and will display the connection status. 
• 

• If the status indicates VPN-Connected and Good this indiactes you are connected to the local site network.
• At this point, you can use any software or remote into any local device as if you were connected to the site's local network.

DISCONNECTING the RAD:

• Save all of the modified work and disconnect from any site local network SCADA, PLC, or HMI.
• Then Select the Disconnect Button in the previous connection window.
• Close the Connection Window and you will be prompt to confrim.
• 
• At the point, you are fully disconnected.